# Manage

# Routes

A Route defines how to access a service running behind Pomerium. This includes authentication (both for Pomerium and passed through to the service), rewrites, header management, load balancing, etc.

# General

The General tab defines the route path, both from the internet and to the internal service, and the policies attached. Note that policies enforced on a Namespace the route resides in will also be applied.

# Name

This value is only visible in the Console UI.

# From

From is the externally accessible URL for the proxied request.

Specifying tcp+https for the scheme enables TCP proxying support for the route. You may map more than one port through the same hostname by specifying a different :port in the URL.


Only secure schemes (https and tcp+https) are supported.

# To

To is the destination(s) of a proxied request. It can be an internal resource, or an external resource. Multiple upstream resources can be targeted by using a list instead of a single URL:

- from: https://example.com
  - https://a.example.com
  - https://b.example.com

A load balancing weight may be associated with a particular upstream by appending ,[weight] to the URL. The exact behavior depends on your lb_policy setting. See Load Balancing for example configurations.

Must be tcp if from is tcp+https.


Be careful with trailing slash.

With rule:

- from: https://verify.corp.example.com
  to: https://verify.pomerium.com/anything

Requests to https://verify.corp.example.com will be forwarded to https://verify.pomerium.com/anything, while requests to https://verify.corp.example.com/foo will be forwarded to https://verify.pomerium.com/anythingfoo.To make the request forwarded to https://httbin.org/anything/foo, you can use double slashes in your request https://httbin.corp.example.com//foo.

While the rule:

- from: https://verify.corp.example.com
  to: https://verify.pomerium.com/anything/

All requests to https://verify.corp.example.com/* will be forwarded to https://verify.pomerium.com/anything/*. That means accessing to https://verify.corp.example.com will be forwarded to https://verify.pomerium.com/anything/. That said, if your application does not handle trailing slash, the request will end up with 404 not found.

Either redirect or to must be set.

# Redirect

Redirect is used to redirect incoming requests to a new URL. The redirect field is an object with several possible options:

  • https_redirect (boolean): the incoming scheme will be swapped with "https".
  • scheme_redirect (string): the incoming scheme will be swapped with the given value.
  • host_redirect (string): the incoming host will be swapped with the given value.
  • port_redirect (integer): the incoming port will be swapped with the given value.
  • path_redirect (string): the incoming path portion of the URL will be swapped with the given value.
  • prefix_rewrite (string): the incoming matched prefix will be swapped with the given value.
  • response_code (integer): the response code to use for the redirect. Defaults to 301.
  • strip_query (boolean): indicates that during redirection, the query portion of the URL will be removed. Defaults to false.

Either redirect or to must be set.

# Pass Identity Headers

When enabled, this option will pass identity headers to upstream applications. These headers include:

  • X-Pomerium-Jwt-Assertion
  • X-Pomerium-Claim-*

# Policies

Add or remove Policies to be applied to the Route. Note that Policies enforced in the Route's Namespace will be applied automatically.

# Enable Google Cloud Serverless Authentication

Enable sending a signed Authorization Header (opens new window) to upstream GCP services.

Requires setting Google Cloud Serverless Authentication Service Account or running Pomerium in an environment with a GCP service account present in default locations.

# Matchers

# Path

If set, the route will only match incoming requests with a path that is an exact match for the specified path.

# Prefix

If set, the route will only match incoming requests with a path that begins with the specified prefix.

# Regex

If set, the route will only match incoming requests with a path that matches the specified regular expression. The supported syntax is the same as the Go regexp package (opens new window) which is based on re2 (opens new window).

# Rewrite

# Prefix Rewrite

If set, indicates that during forwarding, the matched prefix (or path) should be swapped with this value. For example, given this policy:

from: https://from.example.com
to: https://to.example.com
prefix: /admin
prefix_rewrite: /

A request to https://from.example.com/admin would be forwarded to https://to.example.com/.

# Regex Rewrite Pattern

The pattern to match before rewriting, ex: ^/service/([^/]+)(/.*)$.

# Regex Rewrite Substitution

The substitution for your regex pattern, ex: \\2/instance/\\1.

# Timeouts

# Allow Websockets

If set, enables proxying of websocket connections.


Use with caution: websockets are long-lived connections, so global timeouts are not enforced (though the policy-specific timeout is enforced). Allowing websocket connections to the proxy could result in abuse via DOS attacks (opens new window).

# Allow SPDY

If set, enables proxying of SPDY protocol upgrades.

# Timeout

Policy timeout establishes the per-route timeout value. Cannot exceed global timeout values.

# Idle Timeout

If you are proxying long-lived requests that employ streaming calls such as websockets or gRPC, set this to either a maximum value there may be no data exchange over a connection (recommended), or set it to unlimited (0s). If idle_timeout is specified, and timeout is not explicitly set, then timeout would be unlimited (0s). You still may specify maximum lifetime of the connection using timeout value (i.e. to 1 day).

# Headers

# Host Headers

The host header can be preserved via the preserve_host_header setting or customized via 3 mutually exclusive options:

  1. preserve_host_header when enabled, this option will pass the host header from the incoming request to the proxied host, instead of the destination hostname. It's an optional parameter of type bool that defaults to false. See ProxyPreserveHost (opens new window).

  2. host_rewrite which will rewrite the host to a new literal value.

  3. host_rewrite_header which will rewrite the host to match an incoming header value.

  4. host_path_regex_rewrite_pattern, host_path_regex_rewrite_substitution which will rewrite the host according to a regex matching the path. For example with the following config:

    host_path_regex_rewrite_pattern: "^/(.+)/.+$"
    host_path_regex_rewrite_substitution: \1

    Would rewrite the host header to example.com given the path /example.com/some/path.

The 2nd, 3rd and 4th options correspond to the envoy route action host related options, which can be found here (opens new window).

# Set Request Headers

Set Request Headers allows you to set static values for given request headers. This can be useful if you want to pass along additional information to downstream applications as headers, or set authentication header to the request. For example:

- from: https://verify.corp.example.com
  to: https://verify.pomerium.com
    - allow:
          - email:
              is: user@example.com
    # works auto-magically!
    # https://verify.corp.example.com/basic-auth/root/hunter42
    Authorization: Basic cm9vdDpodW50ZXI0Mg==
    X-Your-favorite-authenticating-Proxy: "Pomerium"


Neither :-prefixed pseudo-headers nor the Host: header may be modified via this mechanism. Those headers may instead be modified via mechanisms such as prefix_rewrite, regex_rewrite, and host_rewrite.

# Remove Request Headers

Remove Request Headers allows you to remove given request headers. This can be useful if you want to prevent privacy information from being passed to downstream applications. For example:

- from: https://verify.corp.example.com
  to: https://verify.pomerium.com
    - allow:
          - email:
              is: user@example.com
    - X-Email
    - X-Username

# Rewrite Response Headers

Rewrite Response Headers allows you to modify response headers before they are returned to the client. The header field will match the HTTP header name, and prefix will be replaced with value. For example, if the downstream server returns a header:

Location: http://localhost:8000/two/some/path/

And the policy has this config:

  - header: Location
    prefix: http://localhost:8000/two/
    value: http://frontend/one/

The browser would be redirected to: http://frontend/one/some/path/. This is similar to nginx's proxy_redirect option (opens new window), but can be used for any header.

# Load Balancer

# Load Balancing Policy

In presence of multiple upstreams, defines load balancing strategy between them.

See Envoy documentation (opens new window) for more details.

Some policy types support additional configuration.

# Policies

A Policy defines what permissions a set of users or groups has. Policies are applied to Namespaces or Routes to associate the set of permissions with a service or set of service, completing the authentication model.

Policies can be constructed three ways:

# Web UI

From the BUILDER tab, users can add allow or deny blocks to a policy, containing and/or/not/nor logic to allow or deny sets of users and groups.

A policy being constructed in Pomerium Enterprise allowing a single user access

# Pomerium Policy Language

From the EDITOR tab users can write policies in Pomerium Policy Language (PPL), a YAML-based notation.

A policy as viewed from the editor tab

PPL documents contain one or more rules. Each rule has a corresponding action and one or more logical operators. Each logical operator contains criteria and each criterion has a name and corresponding data.

PPL documents are defined via YAML:

- allow:
      - email:
          is: x@example.com
      - email:
          is: y@example.com

The available rule actions are:

  • allow
  • deny

The available logical operators are:

  • and
  • or
  • not
  • nor

The available criteria types are:

  • accept
  • authenticated_user
  • claim
  • date
  • day_of_week
  • domain
  • email
  • groups
  • http_method
  • http_path
  • reject
  • time_of_day
  • user

Some criteria also support a sub-path as part of the criterion name:

- allow:
      - claim/family_name: Smith

# Rego

For those using OPA (opens new window), the REGO tab will accept policies written in Rego.


A policy can only support PPL or Rego. Once one is set, the other tab is disabled.

# Overrides

  • Any Authenticated User: This setting will allow access to a route with this policy attached to any user who can authenticate to your Identity Provider (IdP).
  • CORS Preflight: Allow unauthenticated HTTP OPTIONS requests as per the CORS spec.
  • Public Access: This setting allows complete, unrestricted access to an associated route. Use this setting with caution.

# Certificates

Certificates are the x509 public-key and private-key used to establish secure HTTP and gRPC connections. Any combination of the above can be used together, and are additive. You can also use any of these settings in conjunction with Autocert to get OCSP stapling.

For example, if specifying multiple certificates at once:

  - cert: "$HOME/.acme.sh/authenticate.example.com_ecc/fullchain.cer"
    key: "$HOME/.acme.sh/authenticate.example.com_ecc/authenticate.example.com.key"
  - cert: "$HOME/.acme.sh/verify.example.com_ecc/fullchain.cer"
    key: "$HOME/.acme.sh/verify.example.com_ecc/verify.example.com.key"
  - cert: "$HOME/.acme.sh/prometheus.example.com_ecc/fullchain.cer"
    key: "$HOME/.acme.sh/prometheus.example.com_ecc/prometheus.example.com.key"